• Standard design pressure 12 bar, 14.8 bar (higher pressures on request)

• Steam production from 700 to 5,000 kg/h

• The door is fixed to the tube plate by means of hinges and is internally lined with an adequate thickness of refractory cement which covers the entire heated surface of the plate itself.

• Generously sized evaporating chamber with a large exchange surface for the production of high quality saturated steam

• Dispersals towards the environment are very limited thanks to adequate insulation of the boiler body carried out with a layer of high-density mineral wool and without thermal bridges, protected by a stainless steel sheet (AISI 430)

• The welding of the pressurized parts is all carried out by qualified personnel approved according to EN standards

• AISI 316 perforated blowing tube is installed inside the combustion chamber

• The explosion-proof door is positioned in the lower part of the rear smoke chamber and is protected by a protective metal grille

• Modern in design and high efficiency, these generators are designed and manufactured in compliance with the European Directive 2014/68/EU (PED) and the most recent national and European standards on pressure vessels

• Certification as a whole according to the PED Directive

• The inspectionability on the water side is guaranteed by a manhole on the top of the boiler and a handhole in the lower part

CERTIFICATIONS

CE marking according to the Directives

Pressure vessels (2014/68/EU)

Low Voltage (2014/35/EU)

Electromagnetic Compatibility (2014/30/EU)

ACCESSORIES ON REQUEST

• Economizer: it is a water-fume heat exchanger that allows to obtain an increase in efficiency of around 4%. Its configuration and positioning are carried out according to the customer's needs.

• Ladder and walkway for safe access to the walkable platform above the boiler

• Modulating power supply system with pump and inverter for optimal management of the water level suitable in combination with economizer

• Burner

• Perforated burner plate

• Second stand-by fuel pump with valves

• System for automatic bottom purging of sludge and dissolved salt deposits

• Salinity control system (TDS) for the detection of dissolved salts in the operating water

• Cooling barrel for boiler water sampling

• BMS 24H for continuous unsupervised operation for up to 24 hours

• BMS 72H for continuous unsupervised operation up to 72 hours

• Second minimum level probe FAIL SAFE

• FAIL SAFE maximum level probe

• “MODULE F” certification

• The control system consists of a PLC equipped with a high-performance color Touch Panel operator interface. Through the interface it is possible to supervise the operation of the Boiler-Burner-System assembly

• VRC condensation collection vessel

• VRD atmospheric degasser

• “DGST” thermophysical deaerator

• “BDV” drain cooler tank

• Water treatment system

• Steam collector